Dell 3000cn Color Laser Printer Page 32 User Manual Download

Page: 32 / 194

Installing the Toner and Drum Cartridges

Installing the Toner Cartridge

Installing the Drum Cartridge

CAUTION:

Before performing any of the following procedures, read and follow the safety instructions in

your

Owner's Manual

Installing the Toner Cartridge

Install or replace the toner cartridge while the printer is on (if the power is not on, the cartridge carrier will not rotate).

1. After confirming the

Insert Yellow Toner(Y)

message, open the front door.

2. Hold the tape on the protective cover and pull it forward to remove the cover from each cartridge slot.

NOTE:

You need to remove the protective cover only the first time that you install the toner.

NOTE:

Dispose of the protective cover after you remove it.

NOTE:

The protective cover is attached to each toner cartridge mount.

3. Make sure the color of the toner cartridge matches the slot on the toner cartridge carrier. The order is Y, M, C, K.

Gently shake the cartridge to distribute the toner evenly.

Summary of Contents for 3000cn Color Laser Printer



































































































































































































Search results

Summary of Contents for 3000cn Color Laser Printer

Reviews:

Related manuals for 3000cn Color Laser Printer

Brands by name

Popular brands

Dell 3000cn Color Laser Printer, User Manual

Search results

Summary of Contents for 3000cn Color Laser Printer

Reviews:

Related manuals for 3000cn Color Laser Printer

Brands by name

Popular brands