Dell 2150CDN, User Manual

Page: 66 / 495

64
Installing Optional Accessories
7 Press button until
Start
appears, and then press the (Set) button.
8 Ensure that the message Please wait Wireless Setting is
displayed, and start the WPS-PBC on the wireless LAN access point
(Registrar), within two minutes of the step 7 operation.
NOTE:
For WPS operation on the wireless LAN access point, refer to the
manual supplied with the wireless LAN access point.
9 When the WPS operation is successful and the printer is rebooted, wireless
LAN connection setting is completed.
Operator Panel
1 Press the (Menu) button.
2 Press button until
Admin Menu
appears, and then press the (Set)
button.
3 Press button until
Network
appears, and then press the (Set)
button.
4 Press button until
Wireless Setup
appears, and then press the
(Set) button.
5 Ensure that
Manual Setup
is displayed, and then press the (Set)
button.
6 Enter the SSID, and then press the (Set) button.
7 Select the network mode from
Infrastructure
and
Ad-hoc
depending on your environment.
When you select
Infrastructure
, proceed to step 8.
When you select
Ad-hoc
, proceed to step 9.
8 Select the encryption type from
No Security
,
WEP (64Bit)
, and
WEP
(128Bit)
.
When you do not set security for your wireless network:
a
Ensure that
No Security
is displayed, and then press the (Set)
button.
To use 64 bit or 128 bit WEP encryption:
a
Press button until
WEP (64Bit)
or
WEP (128Bit)
appears,
and then press the (Set) button.
b
Enter the WEP key, and then press the (Set) button.
Downloaded from ManualsPrinter.com Manuals