Dell 2150CDN, User Manual

Page: 201 / 495

Dell Printer Configuration Web Tool
199
To initialize NVRAM (non-volatile RAM) for the network feature and reboot
the printer. You can also initialize NVRAM of the printer from
Reset Defaults
in the Printer Settings menu.
Values:
Security
The Security tab includes Set Password , SSL/TLS , IPsec , 802.1x and IP
Filter (IPv4) .
Set Password
Purpose:
To set or change the password that is required to access the setup parameters of
the printer from the
Dell Printer Configuration Web Tool .
Set the password of the operator panel from Panel Lock in the Printer Settings .
This page can also be displayed by clicking Set Password in the Left Frame.
NOTE:
To restore the password to the default (NULL), initialize the non-volatile
memory (NVM).
Values:
Initialize NIC
NVRAM Memory and
restart printer. Click the Start button to initialize NVRAM, revert network
settings to the factory default settings, and reboot the network
capability.
Restart Printer Click the Start button to reboot the printer.
Administrator Password Sets the password using up to 10 alphanumeric characters.
Re-enter Administrator
Password Confirms the set password.
Access denial by the
authentication failure of
the Administrator Sets the amount of time the administrator should wait for
the access to the printer setup from
Dell Printer
Configuration Web Tool . Sets the time period from 5 up
to 255 seconds. The access is denied if the time-out time is
exceeded. If you set 0, this mode is disabled.
Downloaded from ManualsPrinter.com Manuals