Dell 2145cn Service Manual Download

Page: 74 / 210

Alignment and Troubleshooting

4-10

4.1.3.4 In the paper exit area

If paper is jammed in the paper exit area, follow the next steps to release the jammed paper.

1. If a long portion of the paper is visible, pull it

straight out. Open and close the front cover
ﬁrmly. The machine will resume printing.

If you cannot ﬁnd the jammed paper, or if there is
any resistance removing the paper, stop pulling

2. Open the scan unit.

3. Open the cover of reverse unit using the handle

on it and carefully take the jammed paper out of
the machine.

If there is any resistance removing the paper or
difﬁculty picking up jammed paper, stop pulling
and turn the release knob to the direction as

4. Close the cover of reverse unit.

green roller

and go to step 2.

Pull the jammed paper out of the machine.

shown to remove the

misfed paper.

You can turn the exit roller eas

ily by turning the

indicated green roller.

Summary of Contents for 2145cn



















































































































































































































Search results

Summary of Contents for 2145cn

Reviews:

Related manuals for 2145cn

Brands by name

Popular brands

Dell 2145cn, Service Manual

Search results

Summary of Contents for 2145cn

Reviews:

Related manuals for 2145cn

Brands by name

Popular brands