Dell 2145cn Service Manual Download

Page: 108 / 210

Alignment and Troubleshooting

4-44

Data Write Fail
Check USB Mem.

Document Jam

Door Open/Check
Transfer Belt

Duplex Jam 0
Check Inside

Duplex Jam 1
Open/Close Door

Enter Again

File Access
Denied

File Format
Not Supported

File Name Exist

File Name
Over Limit

Fuser Fan
Locked

Global Address
Not Found

Global Query
Size Exceeded

Global Server
Auth Failed

Global Server
Not Configured

Global Server
Not Found

Global Server
Query Timeout

Storing to the USB memory failed.

The loaded original has jammed in the DADF.

The front cover is not securely latched.

Paper has jammed during duplex printing.
This is applicable only to machines with this
feature.

You entered an unavailable item.

The selected file format is not supported.

The file name you have entered already
exists.

The file names you can use are from doc001
to doc999.
However, all file names are used already.

There is a problem in the cooling fan of the
machine.

When the device is unable to locate the given
address of the Global server.

This is an error message and displays when
the global query size has been exceeded.

When there is a authentication fail while
connecting to the global server this message
displays.

When no global server is configured, this
message displays.

When the device is unable to find the Global
server.

Network Information Center (NIC) failed to
get the proper response from the LDAP
server within specified time.

Check the available USB memory space.

Clear the jam.

Close the cover until it locks into place.

Clear the jam.

Enter the correct item again.

Change the server settings.

Use the correct file format.

Enter a different file name.

Delete unnecessary files.

Open and then close the front cover.

Check the search ID.

There are too many search results. Refine
your search by entering more letters.
Contact a LDAP server administrator.

Check the authentication account and
password.

Check the LDAP server configuration
settings.

Check the LDAP server address, The LDAP
server address is incorrect, or the server
has failed.

Check the LDAP server setting, LDAP server
setting is incorrect.

Message Meaning

Suggested

Solution

Summary of Contents for 2145cn



















































































































































































































Search results

Summary of Contents for 2145cn

Reviews:

Related manuals for 2145cn

Brands by name

Popular brands

Dell 2145cn, Service Manual

Search results

Summary of Contents for 2145cn

Reviews:

Related manuals for 2145cn

Brands by name

Popular brands