Dell 2145cn Service Manual Download

Page: 86 / 210

Alignment and Troubleshooting

4-22

6. Locate the long strip of glass (LSU) inside the

cartridge compartment, and gently swab the
glass to see if dirt turns the white cotten black.

7. Reinstall all the compartments into the machine,

and close the front cover.

8. Plug in the power cord and turn the machine on.

1. Slightly dampen a soft lint-free cloth or paper

towel with water.

2. Open the scanner lid.

3. Wipe the surface of the scanner glass and DADF

glass until it is clean and dry.

4. Wipe the underside of the scanner lid and white

sheet until it is clean and dry.

5. Close the scanner lid.

Cleaning the scan unit

Keeping the scan unit clean helps ensure the best possible copies. We suggest that you clean the scan unit
at the start of each day and during the day, as needed.

Summary of Contents for 2145cn



















































































































































































































Search results

Summary of Contents for 2145cn

Reviews:

Related manuals for 2145cn

Brands by name

Popular brands

Dell 2145cn, Service Manual

Search results

Summary of Contents for 2145cn

Reviews:

Related manuals for 2145cn

Brands by name

Popular brands