Dell 1125 User Manual Download Page 92

Page: 92 / 111

Required software: Internet Explorer

5.0

Installing Dell Software

A printer driver is software that lets your computer communicate with your printer. The procedure to install drivers depends on the operating system you are
using. The following guide shows the
Windows XP installation procedure.

Power on your computer.

Insert the

Drivers and Utilities

CD.

The installation program begins and the following screen is displayed.

Click

Next

The

License Agreement

screen is displayed.

Take a moment to read the license agreement.

When satisfied, click the

I accept the terms of the license agreement

radio button and click

Next

The

Installation Method

screen is displayed.

NOTE:

Do not connect the printer to your computer at this time. A prompt will appear instructing when to make the connection.

NOTE:

If the Installation program does not start automatically; access the CD drive using the explorer and double click the

Setup.exe

to begin.

Summary of Contents for 1125
















































































































Search results

Summary of Contents for 1125

Reviews:

Brands by name

Popular brands

Dell 1125, User Manual

Search results

Summary of Contents for 1125

Reviews:

Brands by name

Popular brands