Dell 1125 User Manual Download Page 33

Page: 33 / 111

Back to Contents Page

Setting Up Your Printer

Dell™ Multi

-Function Printer 1125

User's Guide

Installing the Paper Tray and Paper Output Tray

Connecting Your Printer

Powering On the Multi-Function Printer 1125

Installing the Paper Tray and Paper Output Tray

The Paper Tray and Paper Output Tray are supplied separately and must be installed prior to operation. See the following installation guides.

Paper Tray Installation

Remove all packaging from the paper tray and discard.

Remove the paper tray cover.

Align the tabs on the paper tray with the slots on the printer and push in the direction of the arrow until an audible click is heard.

Load paper as described below (

Loading Print Media in the Paper Tray

Place the paper tray cover on top of the paper tray and slide in the direction shown until it clicks into place.

Summary of Contents for 1125
















































































































Search results

Summary of Contents for 1125

Reviews:

Related manuals for 1125

Brands by name

Popular brands

Dell 1125, User Manual

Search results

Summary of Contents for 1125

Reviews:

Related manuals for 1125

Brands by name

Popular brands