Dell 1125 User Manual Download Page 105

Page: 105 / 111

The appearance of the power cord and the telephone line cord may differ according to your country's specifications.

The

Drivers and Utilities

CD contains Dell printer drivers, Scan drivers, Printer Settings Utility, Dell Status Monitor, Dell MFP Center, and an HTML

User's Guide.

Save the carton and packing material in case the printer needs to be repacked.

Remove the packing tape from the front, back, and sides of the printer.

Remove the label completely from the scanner module by gently pulling it.

These are the main components of your printer. The following illustrations show the standard Multi-Function Printer 1125.

Front View

Power Cable

Telephone Line Cable

Drivers and Utilities

Placemat

Paper Output Tray

Paper Tray

NOTE:

It is recommended you use an AWG #26 or lower gauge cord that is a maximum 250 cm in length.

NOTE:

The power cord must be plugged into a grounded power socket.

NOTE:

Refer to the setup diagram for installation instructions.

Name:

Description

Automatic Document Feeder (ADF) Loads documents for copying, scanning, or sending faxes.

Document Guide

Ensures that documents are properly fed into the MFP.

Summary of Contents for 1125
















































































































Search results

Summary of Contents for 1125

Reviews:

Related manuals for 1125

Brands by name

Popular brands

Dell 1125, User Manual

Search results

Summary of Contents for 1125

Reviews:

Related manuals for 1125

Brands by name

Popular brands