Steps
1. Align the power distribution board (PDB) screw holes with bracket screw holes and insert the power distribution board into
the bracket.
2. Secure the PDB with the five screws.
3. Connect the intrusion cable to the PDB.
Figure 55. Installing the PDB
4. Align and lower the PDB module into the chassis.
5. Replace the two screws to secure the PDB module.
Figure 56. Installing the PDB module
Next steps
.
2.
Install the power supply units
.
3. Follow the procedure listed in
After working inside the system
Installing and removing enclosure components
53
