Figure 82. Installing optional IDSDM module
Next steps
Install the MicroSD cards
.
NOTE:
Reinstall the MicroSD cards into the same slots based on the labels you had marked on the cards during
removal.
Follow the procedure listed in
After working inside your system
.
Optional IDSDM or vFlash module
NOTE:
The writ e-protect switch is on the IDSDM or vFlash module.
Removing the MicroSD card
Prerequisites
Follow the safety guidelines listed in
Safety instructions
.
Follow the procedure listed in
Before working inside your system
.
Steps
Locate the MicroSD card slot on the vFlash/IDSDM module, and press the card to partially release it from the slot. To locate IDSDM/
vFlash module, see the System board jumpers and connectors section.
Hold the MicroSD card and remove it from the slot.
NOTE:
Temporarily label each MicroSD card with its corresponding slot number after removal.
Installing and removing system components
127
