Steps
1
To remove the battery:
a Push the battery holder clip.
NOTE:
Ensure that you do not push the battery holder clip more than 3.2 millimeters, It may damage the battery
holder.
b Push the battery toward the positive side of the battery until the battery disengages from the connector.
c Lift the battery away from the system.
Figure 49. Removing system battery
2
To install a new system battery:
a Push the battery lock slightly away.
NOTE:
Ensure that you do not push the battery clip more than 3.2 millimeters or you might risk damaging the part.
b Hold the battery with the
+
sign facing the positive side of the battery connector.
c Insert the battery down into the connector until the battery snaps into place.
Installing and removing system components
77