Figure 72. Removing the system board
Next step
1
.
Installing the system board
Prerequisites
1
Follow the safety guidelines listed in the
2
Follow the procedure listed in the
Before working inside your system
3
If you are replacing the system board, remove all the components listed in the
section.
Steps
1
Holding the system board holder, lower the system board into the system.
CAUTION:
Do not lift the system board by holding a memory module, processor, or other components.
CAUTION:
Take care not to damage the system identification button while placing the system board into the system.
2
Incline the system board at an angle and align the connectors on the system board with the slots on the rear of the chassis.
3
Slide the system board toward the rear of the chassis until the connectors are firmly seated in the slots.
Installing and removing system components
97
