Figure 58. Removing the MicroSD card
Next step
1
Installing the MicroSD card
Prerequisites
1
Follow the safety guidelines listed in the
.
2
Follow the procedure listed in the
Before working inside your system
3
4
Remove the IDSDM or vFlash module.
NOTE:
To use a MicroSD card with your system, ensure that the Internal SD Card Port is enabled in System Setup.
NOTE:
If reinstalling, ensure that you install the MicroSD cards into the same slots based on the labels you had marked on the
cards during removal.
Steps
1
Locate the MicroSD card connector on the IDSDM/vFlash module. Orient the MicroSD card appropriately and insert the contact-pin
end of the card into the slot. To locate IDSDM/vFlash, see the
System board jumpers and connectors
section.
NOTE:
The slot is keyed to ensure correct insertion of the card.
2
Press the card into the card slot to lock it into place.
Installing and removing system components
87
