Chapter 5: Deploying SAN Storage
31
Dell EMC Ready Stack: Microsoft Hyper-V on PowerEdge 14G Servers and Unity Storage
Deployment Guide
Click the right arrow to add the aliases to
Zone Members
.
Repeat steps 5b through 6c to create zones for all management and
compute servers
Select
Zoning Actions
>
Save Config
to save the configuration changes.
7.
Enable configuration:
a.
Select the
Zone Config
tab,.
Under
Member Selection List
, expand
Zones
to view the nested elements.
Select all the zones that you created for the management and compute hosts
in the preceding steps.
Click the right arrow to move the selected zones in the
Member Selection
List
to
Zone Config Members
.
Click
Save Config
to save the configuration.
Click
Enable Config
and select the name of the zone configuration.
Click
OK
to enable the zone configuration.
Adding cluster hosts to the storage array
Add cluster hosts to the storage array:
1.
For each server to be added to the storage array, obtain the HBA’s WWNs from
the server’s iDRAC:
a.
Log in to the iDRAC, expand
Hardware
, and then click
Fibre Channel
devices
.
Expand any device under
Fibre Channel Ports
to view the port’s WWN.
2.
Log in to Unisphere storage management.
3.
Select
Access
>
Hosts
.
4.
In the upper left of the
Hosts
pane, click the plus sign (+).
5.
In the
Name
field, enter the server name and click
Next
.
All discovered initiators are shown under
Automatically Discovered Initiators
.
6.
Select the WWN of the server that is being added to the storage array, and then
click
Next
.
7.
Review the selections and, if you are satisfied, click
Finish
.
8.
Repeat steps 5 through 7 for all management and compute servers to be added
to the storage array.
Creating a LUN
The LUNs that you create and present to the management cluster are used as datastores
for the management virtual machines (VMs). You can also create any additional LUNs
that you need for management and compute clusters.
