![Delachaux Conductix-Wampfler 0314 Series Installation Manual Download Page 8](http://html1.mh-extra.com/html/delachaux/conductix-wampfler-0314-series/conductix-wampfler-0314-series_installation-manual_2465764008.webp)
Installation Manual
Festoon Systems for I-Beams
Program 0314
MAL0300-0001-EN
www.conductix.com
translated document
page 8 of 56
2.2
Personnel requirements
2.2.1
Qualifications
WARNING!
Inadequately trained persons are at risk of injury!
Improper use can result in serious injury to persons and property.
Therefore:
- All activities must be carried out by qualified staff!
The following qualifications have been mentioned in this installation manual for different areas of operation:
Trained personnel/operators
have been instructed by the operator about the tasks assigned to him/her and the possible hazards resulting from improper
use.
Specialist personnel
consists of persons capable of performing assigned tasks and independently identifying and avoiding potential hazards based
on their specialist training, knowledge and experience as well as their understanding of the applicable regulations.
Only persons who can be expected to perform their work reliably are acceptable personnel. Persons whose responsiveness is
influenced by drugs, alcohol, or medications, for example, are not permitted.
When selecting personnel, all age- and occupation-specific regulations applicable at the place of use must be observed.
2.2.2
Unauthorized personnel
WARNING!
Danger due to unauthorized personnel!
Unauthorized persons who do not meet the requirements described here are not acquainted with the
dangers in the working area.
Therefore:
- Keep unauthorized personnel away from the working area.
- In case of doubt, address such persons and direct them away from the working area.
- Stop work as long as unauthorized persons are in the working area.
2.2.3
Training
Before commissioning the equipment, personnel must be trained by the owner. For better tracking, log the instruction as follows:
Date
Name
Type of training
Training given by
Signature
Fig. 1: Example of instruction log