Installation Manual
Festoon Systems for I-Beams
Program 0314
MAL0300-0001-EN
www.conductix.com
translated document
page 28 of 56
5.2
Packaging
The individually packaged parts have been packed in accordance with the anticipated transport conditions Only environmentally
friendly materials have been used for packaging.
The packaging is designed to protect the individual components from transport damage, corrosion and other harm until installation.
As a result, do not destroy the packaging, remove it only shortly before installation.
Handling packaging materials:
Dispose of packaging material according to applicable legal regulations and local guidelines.
CAUTION!
Environmental damage due to improper disposal!
Packaging materials are valuable resources and can be reused or usefully processed or recycled in
many cases.
Therefore:
- Dispose of packaging materials in an environmentally appropriate manner.
- Comply with locally applicable disposal guidelines; if necessary, engage a specialist to handle
disposal.
5.3
Storage of packed parts
Store packed parts under the following conditions:
Do not store outdoors.
Store in a dry, dust-free place.
Do not expose to aggressive media.
Protect from direct sunlight.
Avoid mechanical vibrations.
Storage temperature: +15 to +35°C.
Relative humidity max. 50%
When storing for more than 3 months, check the general condition of all parts and the packaging at regular intervals. If
necessary, refresh or replace the preservative.
NOTE!
In some cases, there may be instructions for storage on the packed parts that go beyond the
requirements listed here. Comply with them accordingly.
