background image

TrioPure

TM

 

Sanitation System

7D.  DEL Ozone TrioPure

TM

 Limited Warranty

The limited warranty set forth below applies to products manufactured by DEL Ozone – 3428 Bullock Lane, San Luis Obispo, Cali-

fornia 93401, and sold by DEL Ozone or its authorized dealers.  This limited warranty is given only to the first retail purchaser of 

such products and is not transferable to any subsequent owners or purchasers of such products.  

DEL Ozone warrants the TrioPure

TM

, including all parts and components thereof, to be free of defects in material and workman-

ship.  This limited warranty applies only if the TrioPure

TM

 is installed and maintained in accordance with the TrioPure

TM

 installation 

instructions and specifications provided with the product.  

This limited warranty commences on the date of installation or, if written proof of the date if the initial system installation is 

not provided to DEL Ozone, the manufacturing date code on the TrioPure

TM

 unit + sixty (60) days will be the sole determinant 

of the date of the initial system installation and shall remain in effect for:

One (1) year on all parts with the exception of the chlorine cell.
One (1) year on all parts of the chlorine cell, with an additional two (2) years on a pro-rated basis based upon the following 

formula.  Defects that become evident during years 2 and 3 of the warranty will be repaired or product replaced at the 

following costs to the TrioPure

TM

 owner:

Year 2: 50% of the current list price

Year 3: 75% of the current list price

One (1) year on labor for removal or reinstallation of the initial system due to defects in material and workmanship.  The 

consumer will be responsible for any additional fees or expenses imposed by the service center.

(All parts) ANY REPAIR OR REPLACEMENT WILL BE WARRANTED ONLY FOR THE BALANCE OF THE ORIGINAL WARRANTY PERIOD.  

NOTE: USE ONLY DEL OZONE AUTHORIZED REPLACEMENT PARTS.  USE OF ANY OTHER PART(S) WILL AUTOMATICALLY VOID 

THIS WARRANTY.  
THIS LIMITED WARRANTY DOES NOT INCLUDE ANY OF THE FOLLOWING: (a)

 

repairs/modifications made or attempted by other 

than DEL Ozone or one it its Authorized Service Centers: (b) any repair or replacement of such parts necessitated by faulty 

installation, improper maintenance 

(Calcified chlorinator cells are not covered)

, improper operation, misuse, abuse, negligence, 

accident, fire, repair materials, lack of reasonable and necessary maintenance and/or unauthorized accessories; (c) any such 

products installed without regard to required local codes and accepted trade practices or; (d) ANY IMPLIED WARRANTY OF 

MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS FOR PARTICULAR PURPOSE, AND SUCH WARRANTIES ARE HEREBY 

DISCLAIMED: AND (E) DEL OZONE SHALL NOT BE LIABLE UNDER ANY CIRCUMSTANCES FOR LOSS OF USE OF SUCH PRODUCTS, 

LOST PROFITS, DIRECT DAMAGES, INDIRECT DAMAGES, CONSEQUENTIAL DAMAGES AND/OR INCIDENTAL DAMAGES.

This warranty gives you specific legal rights.  You may have other rights, which vary from state to state.  

TO VALIDATE THIS WARRANTY PRODUCT

Registration should be completed for each TrioPure

TM

 product purchased.  You may register your products online at www.delozone.

com. Additionally,

 p

roduct registration cards are included with each TrioPure

TM

 product, for registration by mail.  You may also register 

by calling (800) 676-1335, extension 293.

24

10.

Quick Troubleshooting Guide

4-0779

11.

Fuse 3.0 A (for 120V)

5-9019

12.

Fuse 1.5 A (for 240V)

5-9020

13.

Fuse 0.5 A, Ozone cell

5-0180

14.

Tubing - 0.4 cm (3/16”) ID x 0.7 

cm (5/16”) OD Black Air Tubing for 

Ozone Inlet 

7-0079 

15.

Ozone Tubing/Check Valve 

Replacement Kit

9-0674-01 

16.

Acid Cleaning Kit

9-0653

7C. Standard replacement parts list (Continued)                                TrioPure-25   

DEL Ozone · San Luis Obispo, CA 93401 · USA · 800-676-1335 · Fax: 805-541-8459

3580 Sueldo Street

          

Notification Change

Summary of Contents for TrioPure 25
































Reviews: