Fig.23
Space to be allowed for boilers equipped with a low-loss header kit, plate heat exchanger kit or cascade kit
MW-1000019-04
25
0
25
0
11
27
84
8
1100
1100
50
0
50
0
1000
681
250
320
1000
681
250
500
5.3.3
Data plate
The data plate is located on the back of the boiler. The data plate provides
important information regarding the appliance:
Serial number
Model
Gas category
etc.
Caution
A second data plate is provided in the instructions bag. The
second data plate should be affixed to a visible part of the boiler
when installation has been completed.
If the boiler is equipped with a hydraulic kit (low-loss header kit,
plate heat exchanger kit, cascade kit), a position on the side of the
boiler is preferable.
5.3.4
Selecting the position for the outside temperature sensor
(optional)
It is important to select a position that allows the sensor to measure the
outside conditions correctly and effectively.
Recommended positions
Place the outside sensor in a position that covers the following
characteristics:
On a façade of the area to be heated, on the north if possible.
Half way up the wall of the area to be heated.
Under the influence of changes in the weather.
Protected from direct sunlight.
Easy to access.
Fig.24
MW-3000013
5 Before installation
7702703 - v04 - 05092019
IX
31
