decon E-Drive PLUS User Manual Download Page 82

Page: 82 / 117

NOTICE

● Do not pull on the power cord. This can cause the wires to break.

Check that the charge lamp (green) on the

charger turns on.

If the charge lamp does not comes on green,

see “9.6. Charger (ESC3) Indicator Lamps”.

While charging, you can check the charge

status using the capacity indicator lamps on

the battery.

The capacity indicator lamps will turn off after

charging has completed.

Assuming that charging started with the bat-

tery in an empty state, the time to completion

is typically 4.5 hours.

After charging has completed, unplug the

charger plug and the power plug, then securely

close the battery’s connector cover.

Charge lamp

Charging

Charging starts

Charging

complete

All lamps turn off

Charging

complete

Turn on successively

Connector cover

Charger plug

Power plug

Summary of Contents for E-Drive PLUS






















































































































Search results

Summary of Contents for E-Drive PLUS

Reviews:

Related manuals for E-Drive PLUS

Brands by name

Popular brands

decon E-Drive PLUS, User Manual

Search results

Summary of Contents for E-Drive PLUS

Reviews:

Related manuals for E-Drive PLUS

Brands by name

Popular brands