decon E-Drive PLUS User Manual Download

Page: 80 / 117

Insert the power plug of the dedicated

charger (ESC3) into the residential power

outlet.

Residential power outlet

Connector cover

Charger plug

Power plug

Rest the battery on its side.

Open the connector cover, and insert the

charger plug into the charge connector

on the battery.

Check that the charge lamp (green) on

the charger turns on.

If the charge lamp does not light green,

see “9.6. Charger (ESC3) Indicator

Lamps”.

While charging, you can check the

charge status using the capacity indica-

tor lamps on the battery.

The capacity indicator lamps will turn off

after charging has completed.

Assuming that charging started with the

battery in an empty state, the time to

completion is typically 4.5 hours.

After plugging in the charger, it takes about 5 seconds for the charging lamp to light.

TIP

All lamps turn off

Charging complete

Turn on successively

Charging starts

Charging

Charge lamp

Summary of Contents for E-Drive PLUS






















































































































Search results

Summary of Contents for E-Drive PLUS

Reviews:

Related manuals for E-Drive PLUS

Brands by name

Popular brands

decon E-Drive PLUS, User Manual

Search results

Summary of Contents for E-Drive PLUS

Reviews:

Related manuals for E-Drive PLUS

Brands by name

Popular brands