65
8
Charger lamp indication
Battery capacity
indicator lamps
Description
Lit or flashing red
Charge lamp (red)
Off
The charger has detected a problem in the
charger or the battery, and is unable to
charge. Stop charging by disconnecting the
charger plug and the power plug. Check the
battery, charger, and cord connection for
any problem, and then try charging again.
If the charge lamp light comes on or flashes
in red again, an equipment failure may have
occurred. Stop charging by disconnecting
the charger plug and the power plug, and
have the equipment inspected by a dealer.
Charge lamp (green) is flashing
(once per second)
Charge lamp (green)
On
Flashing
Indicates charge standby.
• When the temperature of the battery is
not within the chargeable range 0 to 40°C,
the charger enters a standby state and
the charge lamp (green) starts flashing.
• Once the battery temperature falls within
the chargeable range during standby,
charging will start automatically and the
charge lamp (green) changes from a
flashing to an “on” state. However, if the
charge standby condition continues for
a long time, charging will end, and the
power for the charger will turn off.
Charge lamp (green) is flashing
(5 times per second)
Charge lamp (green)
On
Flashing
Indicates timeout of charge standby.
• The charger has remained in standby mode
for a long time and has stopped charging
the battery. Re-locate the charger and try
to charge the battery again.
Refresh lamp (orange) is
flashing
Refresh lamp (orange)
Flashing
On
Refresh charging is being requested.
While the refresh lamp is flashing, press the
refresh switch to perform a refresh charge
cycle.
If you do not press the refresh switch, a
normal charging begins after 1 minute.
