decon E-Drive PLUS User Manual Download Page 92

Page: 92 / 117

Pull each power unit to ensure that it will not come

off.

Place the power units in their normal position, and

then apply the parking brakes.

Remove the cap from the connector on the

left wheel.

Align the white dot (arrow mark) on the con-

nector at the end of the cable with the white

dot on the connector on the wheel side, and

then push in the cable connector until it

clicks.

Connect the cable with an L mark to the

connector with an L mark (on the wheel

side), and connect the cable with an R mark

to the connector with an R mark (on the

wheel side).

Make sure that the connector will not be

disconnected.

White dot

Cap

Connector

(on the cable side)

Connector

(on the wheel side)

Push in each power unit completely. Check to en-

sure that the two balls “a” on the end of the axle

can be seen completely.

NOTICE

●

When you install the right wheel on models that feature an integrated battery, sup-

port the battery storage compartment to prevent the wheel from turning. Other-

wise, the wheel might turn, possibly causing damage to the switch or the battery

storage compartment.

Summary of Contents for E-Drive PLUS






















































































































Search results

Summary of Contents for E-Drive PLUS

Reviews:

Related manuals for E-Drive PLUS

Brands by name

Popular brands

decon E-Drive PLUS, User Manual

Search results

Summary of Contents for E-Drive PLUS

Reviews:

Related manuals for E-Drive PLUS

Brands by name

Popular brands