46
6
6. How to Use the Assistant Controller
Even if you are using the wheelchair with assistive operation, read “3. Before Sitting in the
Wheelchair”, “4. Riding the Wheelchair”, “5. After You are Finished Riding the Wheelchair”.
6.1. Getting in the Wheelchair
Have the user get in the wheelchair according to “4.1. Sitting in the Wheelchair”.
6.2. Starting Assistant Travel Mode
After 1 second
Forward
switch
Reverse
switch
Power
switch
(1) Switch the left and right clutches to
the power drive position.
All lamps turn on.
The battery residual capacity lamp
indicates the current battery residual
capacity.
The warning
lamp (red)
turns off.
The power lamp
(green) stays lit.
(2) Turn on the power for the assistant controller.
When you turn on the power, the lamp display changes as
shown in the lower-right figure.
When you turn on the power switch, if the battery residual
capacity is less than 10%, the warning lamp flashes, and a
buzzer beeps “Pi Pi Pi Pi” (4 times). Charge the battery at
your earliest convenience.
24"
16"
