decon E-Drive PLUS User Manual Download Page 71

Page: 71 / 117

• Standby mode may be activated, and the charge indicator lamp may flash green

once per second if the ambient temperature changes while the charger is charging.

When the temperature is suitable for charging, the charge indicator lamp will stop

flashing and remain on green, and the charging operation will automatically re-start.

• If standby conditions continue for a long time, the charge indicator lamp will start flashing

green rapidly (five times per second) and the charging operation will be terminated.

If this happens, unplug the charging plug and the power plug. Re-locate the charger

in accordance with “8.3.(1) Ambient temperatures” and try to charge the battery

again.

• The charger protection function may be activated by a change in the am-

bient temperature even while charging is in progress. In this case, the

charge indicator lamp will flash red and the charger will stop charging.

If this happens, unplug the charging plug and the power plug. Re-locate the charger

inaccordance with “8.3.(1) Ambient temperatures” and try to charge the battery again.

TIP

8.6. Charger (ESC3) Indicator Lamps

The charger (ESC3) for the nickel metal hydride battery has two types of lamps: the charge

lamp (green) and refresh lamp (orange). Each lamp comes on or flashes to indicate the bat-

tery and charging conditions.

The lamp indications are explained in the following table.

Charger lamp indication

Battery capacity

indicator lamps

Description

Charge lamp (green) is on

Charge lamp (green)

Turn on

suc-

ces-

sively

Indicates normal charging.

The charge lamp will turn off after charging

is completed.

Tips on charging

• It is recommended that you charge the battery while you are sleeping.
• Since the refresh charging process recharges after discharging all of its remaining

electricity, it will take a long time if you perform it on a battery with a high residual

capacity. It is recommended that you perform a refresh charging on a battery that

is drained as much as possible.

TIP

Summary of Contents for E-Drive PLUS






















































































































Search results

Summary of Contents for E-Drive PLUS

Reviews:

Related manuals for E-Drive PLUS

Brands by name

Popular brands

decon E-Drive PLUS, User Manual

Search results

Summary of Contents for E-Drive PLUS

Reviews:

Related manuals for E-Drive PLUS

Brands by name

Popular brands