ICS –Quick reference card
V4.10 dd 12-11-2015
For additional information see manual: OM_xx_ICS_OnBoard_Configuration (xx = Language code)
1 of 2
General Settings
User weight
Entry:
Button 2 and 4
(all led’s green
– led 7 off / led 8 flashes red)
Setting:
Button 1 or 5
Save:
Button 8 (2 sec)
0-50 kg / 0-110 lb
121-135 kg / 266-300 lb
51-75 kg / 111-165 lb
136-160 kg / 301-350 lb
76-100 kg / 166-220 lb
161-180 kg / 351-400 lb
101-120 kg / 121-265 lb
181-200 kg / 401-450 lb
LED indication level
Entry:
Button 2 and 4
(all led’s green –
led 7 off / led 8 flashes red)
Setting: Button 3 or 7
Save:
Button 8 (2 sec)
Level 1
All LEDs off.
No indications. (Use with “single page” layouts.)
Level 2
Only displays Green LEDs
No indication of Drive Speed or Actuator Limits.
Level 3
Only displays Solid LEDs
No indication of Actuator Limits (Only Drive Speed.)
Level 4
All Indications Displayed
(Default Setting)
NOTE: Flashing RED LEDs (Actuator Errors) are displayed in every Indication Level.
Switch box Layout
Entry:
Button 1 and 3
(all led’s green
– led 7 flashes green
/led 8 cont. red)
Setting:
Button 1 or 5
Save:
Button 8 (2 sec)
Note:
*1
Only for CorpusVS
CorpusAPE/CorpusVS
CorpusII / Corpus3G
VS
K450
1
A
A
D
J
2
B
B
E
K
3
C
C
F
4
D
D
G
5
E
M
6
F
7
G
*1
L
12
L
Other General Setting
Entry:
Button 2, 7 and 8
(all led’s green –
led 7 and 8 toggle green)
Next page: Button 4
Prev. page: Button 8
Page 1:
Led 7 and 8
toggle green
Page 2:
Led 7 flashes green
and Led 8 Off
Page 3:
Led 7 cont. green
and Led 8 Off
Save:
No action required
Setting:
Page LED
Button
Green
Red
1
1
1
Actuators blocked while driving
Actuators enabled while driving
1
2
5
Low backrest installed (C3G)
Standard (High) backrest installed
1
3
2
-5 Tilt adapter installed
No -5 Tilt adapter installed
1
4
6
Pause tilt at 0º
No pause Tilt at 0º
1
5
3
Leg rest pauses before reducing speed
Leg rest does not pauses before reducing speed
1
6
7
Enable IRM (Independent Repositioning Mode)
Disable IRM (Independent Repositioning Mode)
2
1
1
Push leg rest on
Push leg rest off
2
2
5
Push back on
Push back off
2
3
2
Invert Elevator: up is rear button
Invert Elevator: up is front button
2
4
6
Invert Tilt: forward is rear button
Invert Tilt: forward is front button
2
5
3
Invert Backrest: forward is rear button
Invert Backrest: forward is front button
2
6
7
Invert Leg rest: up is rear button
Invert Leg rest: down is front button
3
1
1
Leg rest linked to backrest
Leg rest NOT linked to backrest
Corpus II seat
Legrest angle for ¼ speed
(rear-/mid-wheel driven chairs)
Entry:
Button 1, 2 and 7
(all led’s green – led 7 flashes red
/led 8 flashes green)
Setting:
Button 1 or 5
Save:
Button 8 (2 sec)
3º
15º
6º
18º
9º
21º
12º
Corpus 3G/HD/APE/VS
Seat depth
Entry:
Button 3, 4 and 6
(all led’s green – led 7 flashes green
/led 8 flashes red)
Setting:
Button 1 or 5
Save:
Button 8 (2 sec)
<470mm/18”
545mm/21”
620mm/24”
495mm/19”
570mm/22”
520mm/20”
595mm/23”
Legrest angle offset for ¼ speed
(rear-/mid-wheel driven chairs)
Entry:
Button 1, 2 and 7
(all leds green – led 7 flashes red
/led 8 flashes green)
Setting:
Button 1 or 5
Save:
Button 8 (2 s
ec)
+12º
+3º
-6º
+9º
0º
-9º
+=6º
-3º
-12º
IRM position (Corpus 3G/HD/APE/VS)
Independent Repositioning Mode is
using/replacing Memory 3
Note: IRM needs to be enable (see above: Other
General Settings)
Entry:
Button 5 and 7
(all led’s green – led 8 flashes red/green)
Extra step for Corpus APE and Corpus VS only:
- Press button 7. (Led 7 will lit solid green)
Setting backwards position:
Button 1 or 5
Tilt
Button 2 or 6
Legrest
Button 3 or 7
Backrest
Save:
Button 4
Setting forwards position:
Button 1 or 5
Tilt
Button 2 or 6
Legrest
Button 3 or 7
Backrest
Save:
Button 8
