decon E-Drive PLUS User Manual Download Page 108

Page: 108 / 117

101

12.2. Daily Checks

Perform the following checks every day before operating the wheelchair. For details, refer to

“3.1. Inspecting the Wheelchair”.



Exterior

Visually check the components and ensure that they are not

damaged.



Anti-tip device

Make that the anti-tip device is in the correct position and

locked in place.



Rear tires

Make sure that there is tire depth, there are no cracks, and

there is sufficient air pressure.

If the pressure is not enough, pump up E-Drive PLUS accord-

ing to "13 Dimensions and Specifications".



Parking brakes

Make sure that the parking brakes can stop the wheels from

moving, and that they are installed securely to the frame.



Wheels

Make sure that the wheels are not deformed and the spokes

are not broken.



Casters

Make sure that there is tire depth, and there are no cracks.

Make sure that the caster forks are not damaged.

Make that the nuts securing the tires are not loose.



Battery

Check the residual capacity.

If any problems are found, have the dealer repair the wheelchair.

12.3. End of E-Drive PLUS Use Recycling

When E-Drive PLUS is at the end of its service life and must be disposed, contact your local

government office first for recycling and follow their instructions. Or contact your dealer to re-

cycle your used E-Drive PLUS and its batteries.

[About the European WEEE Directive 2012/19/eu]

The E-Drive PLUS and its accessories are subject to the European WEEE

Directive. Follow the applicable regulations of your contry or region when

discarding this instrument or its accessories. (WEEE stands for Waste Electrical

and Electronic Equipment.)

Summary of Contents for E-Drive PLUS






















































































































Search results

Summary of Contents for E-Drive PLUS

Reviews:

Related manuals for E-Drive PLUS

Brands by name

Popular brands

decon E-Drive PLUS, User Manual

Search results

Summary of Contents for E-Drive PLUS

Reviews:

Related manuals for E-Drive PLUS

Brands by name

Popular brands