Deco Chef DGPST01BLK User Manual Download Page 22

Page: 22 / 23

FAQ

• This product is not intended to be operated by means of an external timer or

separate remote-control system.

• Ensure all surfaces that are in contact with food are clean.

• To protect against electric shock, do not immerse the cord, plugs, or housing in

water or any other liquids.

• Unplug from outlet when not is use, before putting on or taking off parts, and

before cleaning.

• Do not place on or near a hot gas or electric burner, or in a heated oven.

• Do not touch any moving or spinning parts of the product while it is operating

or still plugged into a power supply.

• If ingredients or parts are stuck, switch off and unplug the product before you

open or remove the stuck item from the paddles.

• Do not cover the product while it is operating or hot to prevent overheating.

• Do not attempt to insert or remove the plug with wet hands.

• Do not use product for unintended uses.

• Do not open, dismantle, or modify the Base. Do not operate any product with a

damaged cord or plug, or after the product malfunctions or has been damaged

in any manner. Repair and service work should always be carried out by Custom-

er Care/Service Center.

Summary of Contents for DGPST01BLK
























Search results

Summary of Contents for DGPST01BLK

Reviews:

Related manuals for DGPST01BLK

Brands by name

Popular brands

Deco Chef DGPST01BLK, User Manual

Search results

Summary of Contents for DGPST01BLK

Reviews:

Related manuals for DGPST01BLK

Brands by name

Popular brands