background image

MAINTENANCE &

CLEANING

19

• Ensure the product’s wiring is properly grounded.

• Switch off the power before assembling or disassembling.

• Do not substitute extension cords for permeant wiring. 

• Ensure all packaging materials and any promotional labels or stickers are re-

moved from the product before the first use.

• This product should be used for preparation of food as described within the 

instructions.

• Always inspect the product before use for any noticeable signs of damage. Do 

not use if damaged or if it has been dropped. In the event of damage, or if the 

product develops a fault, contact Customer Care/Service Center.

• Always assemble the product properly before connecting it to the power supply 

to prevent damage to the product.

• Do not use any accessories or attachments with this product other than the 

parts and accessories that come with it.

• For indoor use only.

• For domestic use only. Do not use for commercial purposes.

• The dough is too moist if it becomes stuck to the Mixing Paddle. Add some 

flour to make the dough malleable. The dough is too dry if it is powdery, grainy, 

and breaks into small chunks during the extrusion process. Add more liquid by 

the teaspoon until the dough is malleable. 

Summary of Contents for DGPST01BLK
























Reviews: