Decision Data IS-488, User Manual

Page: 55 / 162

Online setup menu
1. Press the Spacebar to enter Edit mode.
2. To exit Edit mode press the Up or Down arrow keys.
NOTE: Automatically changes the Form Length In Millimeters
parameter to the corresponding value.
4.4.5.6 Form Length In
Millimeters
Maximum form length value = 609.60 millimeters.
To change a form length:
1. Press the Spacebar to enter Edit mode.
2. To exit Edit mode press the Up or Down arrow keys.
NOTE: Automatically changes the Form Length In Inches
parameter to the corresponding value.
4.4.5.7 First Print Line Specifies the line on which the next screen print operation
should begin.
To change the value:
1. Press the Spacebar to enter Edit mode.
2. To exit Edit mode press the Up or Down arrow keys.
NOTE: If a line which is beyond the specified form length is
specified, then unpredictable results can occur.
4.4.5.8 Print First Column
Specifies the column on which each line of the screen print will
start:
To change the value:
1. Press the Spacebar to enter Edit mode.
2. To exit Edit mode press the Up or Down arrow keys.
NOTE: If a column position which is beyond the maximum print
position for a given form width and given character density is
specified, then unpredictable results can occur.
4-15