TREK1000 User Manual
© Decawave 2016
This document is confidential and contains information which is proprietary to
Decawave Limited. No reproduction is permitted without prior express written permission of the
author
Page
30 of 54
o
Anchor 0 and Anchor 1 are positioned on the x-axis and
Anchor 2’s position is
calculated and positioned relative to them.
o
The system continuously auto-positions and tunes the locations, so after the
locations have settled the user should uncheck the ‘Use Auto-Position’
checkbox to freeze the anchor locations.
o
While Auto-Positioning is enabled the user cannot write x, y values into the
grid locations of Anchors 0, 1 or 2
Some basic filtering options are provided as an example
o
None
No filtering is applied
o
Moving Average
A length 10 moving average filter is applied
o
Moving Avg. Ex.
A length 10 moving average filter, excluding min value
and max value before averaging) is applied
Logging Enable/Disable:
o
Enable or Disable location co-ordinates estimates and Tag-to-Anchor and
Anchor-to-Anchor range estimates to be written to a file
o
A unique filename is created each time it is started
4 User Checkboxes:
o
Show / Hide the Tag history
o
Show / Hide the Anchor Table
o
Show / Hide the Tag Table
o
Show / Hide the Anchor-Tag Correction Table
