TREK1000 User Manual
© Decawave 2016
This document is confidential and contains information which is proprietary to
Decawave Limited. No reproduction is permitted without prior express written permission of the
author
Page
23 of 54
4.3 Navigation Use Case
The setup and arrangement for the Navigation Use Case is the same as the setup and
arrangement for the Tracking Use Case with the only difference being the PC is connected
to the Tag rather than the Anchor.
For evaluating the tracking use case the system is configured as:
3 Anchors
1 Tag
In this case example below: Channel 2, 110 kbps is selected as the operating mode.
The 3 Anchors are configured as shown below.
Figure 21: Navigation Use Case: Example Anchor Settings
The Tag is configured as shown below.
Figure 22: Navigation Use Case: Example Tag Settings
To demonstrate this use case the following setup is recommended:
Mount the 3 Anchors at the same height
Note: Differences in heights will result in reduced accuracy of location
