TREK1000 User Manual
© Decawave 2016
This document is confidential and contains information which is proprietary to
Decawave Limited. No reproduction is permitted without prior express written permission of the
author
Page
21 of 54
4.1.1 Arrangement
To demonstrate this use case the following setup is recommended:
Mount the 3 Anchors at the same height
Note: Differences in heights will result in reduced accuracy of location
Mount the 3 Anchors high enough where there is good Line-of-Sight (LOS) with no
obstructions between them e.g. mounting 2-3 m high would ensure they are above
people’s heads which will help avoid interference.
Mount the 3 Anchors to create a triangle
Ensure the antennas are >15 cm away from the nearest wall or any other objects
Connect the PC to one of the Anchors
Power the other 2 Anchors and the Tag using an external USB battery (or other
method)
Figure 17: Tracking Use Case: Arrangement
4.2 Geo-Fencing Use Case
For evaluating the tracking use case the system is configured as:
1 Anchor
3 Tags
In this case example below: Channel 2, 110 kbps is selected as the operating mode.
The Anchor is configured as shown below.
Figure 18: Geo-Fencing Use Case: Example Anchor Settings
