SV
R
2-
01
™
U
se
r’s
M
an
ua
l
12
Figure 3.5
Insert batteries .
Once the batteries have been properly loaded into the holder and
the holder has been inserted into the handle of the gun then the
door can be put back in place and slid closed . If you have not already
charged the batteries using an optional NiMH charger, you are now
ready to charge the batteries using the power cable .
• If the holder has been placed incorrectly into the
handle the door can not be put back in place and
closed . .
3.6 Charging the Batteries
The power cable that comes with the SVR™ can be used to either
power the SVR™ directly from your vehicle receptacle or to charge
the SVR’s™ batteries . Once the batteries have been properly installed
into the holder and inserted into the handle plug the power cord
into the power connector at the base of the handle by aligning the
red dot on the power cord’s plug with the red dot on the connector .
Failure to align the plug with the connector properly will result
in damage to the pins of the jack . Reference Figure 3 .6 for proper
alignment .
