SV
R
2-
01
™
U
se
r’s
M
an
ua
l
23
5.1.5 Display Function SEN
–
Sensitivity Display and Adjustment
Higher numbers tell the gun to pickup surface velocity from
a further distance . Lower numbers reduce the distance . If the
sensitivity is too high the indicated velocity may be unpredictable
and erratic . Choose a value that works best for the site you are
taking measurements at .
Figure 5.1.5
Sensitivity Mode
5.1.6 High/Low Speed Selection
Used to set the range of speeds that the SVR will measure . A "LO"
setting sets the SVR to measure speeds in the range of 1 fps to
30 fps (0 .3 m/s to 9 .1 m/s) . A "HI" setting sets the SVR to measure
speeds in the range of 2 fps to 65 fps (0 .6 m/s to 20 m/s) .
Figure 5.1.6a
High/Low Mode
Figure 5.1.6b
Low speed selection
Figure 5.1.6c
High speed selection
