Description of Menu Options
3–40 Configuring the Module
[7] Configure Out-of-Band Port (Cont.)
[2] Enable/Disable RTS
This option prompts you to enable or disable the request-to-send (RTS)
signal line on the OBM port.
_____________________________Note ________________________
This option is operational only when the module is in standalone
mode (when it is installed into a DEChub ONE).
_______________________________________________________________
When you enable this option, the RTS signal on the OBM port is active
only when data is being transmitted to the OBM port. When you disable
this option, RTS is always active.
The factory default of this menu option is
DISABLED
.
