Description of Menu Options
Configuring the Module 3–25
[4] Configure IP (Cont.)
[6] Enable/Disable BootP (Cont.)
Example of Dialog
The following example shows the dialog associated with this option:
=========================================================
Enter selection : 6
PORTswitch 900FP
=========================================================
ENABLE/DISABLE BOOTP
BOOTP is the IP bootstrap protocol. BOOTP may be used
to obtain the module's IP address, subnet mask, and
default gateway. When BOOTP in Enabled and the module is
not configured with an IP address the module will send
out BOOTP requests until it receives a response or is
manually configured with an IP address. When BOOTP is
disabled, no BOOTP requests will be sent.
The BOOTP server must be properly configured to return
the address information.
=========================================================
The BOOTP process is DISABLED
Would you like to ENABLE BOOTP Y/[N]
Press Return for Main Menu...
