Description of Menu Options
3–14 Configuring the Module
[3] Show Current Settings
This option shows the module's current settings. If your hardware
revision is v 2.0 or less, PORTswitch 900FP is replaced with
DECrepeater 900FP.
_____________________________Note ________________________
If the module is being configured for the first time, some fields
are blank.
_______________________________________________________________
Example of Display
The following example shows the display associated with this option:
Enter selection : 3
PORTswitch 900FP - slot 3
=====================================================================
PORTswitch 900FP, 12-Port
Ethernet Rptr SNMP, HW=v2,RO=v00.03,SW=v2.0
SysUpTime
: 01:39:11 14 resets
SNMP Read/Write Community
: public
SNMP Trap Addresses
: Not Configured
Status of Last Downline Upgrade
: No Status
00:00:44 28 resets
In-Band Interface Hardware Address
: 08-00-2B-A3-4C-70
In-Band Interface IP Address
: 16.20.216.181
In-Band Interface Default Gateway Address
: Not Configured
Out-of-Band (OBM) Management RTS
: Disabled
BootP
: Disabled
Interface IP Address Subnet Mask Def.Gatewa Other Info
Ethernet 16.20.156.24 0.255.255.255 16.20.157.25 08-00-2B-B1-4D-C7
OBM Port 16.20.158.26 Speed 9600 bps
=====================================================================
Press Return for Main Menu ...
Out-of-Band (OBM) Management RTS
appears only when the
module is installed into a DEChub ONE.
OBM Port information including port
Speed
appears only when the
module is installed into a DEChub ONE
