Description of Menu Options
3–16 Configuring the Module
[4] Configure IP (Cont.)
DEChub ONE Configure IP Options Menu
The following example displays the options available when the module is
installed into a DEChub ONE standalone configuration. Note that option
[7] is available only when the module is in the standalone configuration
=========================================================
Enter selection : 4
PORTswitch 900FP
=========================================================
IP CONFIGURATION
[1] Set SNMP Read/Write Community
[2] Add SNMP Trap Addresses
[3] Delete SNMP Trap Addresses
[4] Set In-Band Interface IP Address
[5] Set Out-of-Band Interface IP Address
[6] Enable/Disable BootP
[7] Return to Main Menu
=========================================================
Enter selection number : [1] <Return>
The following nine pages describe the IP configuration options.
