Configuring the Ports
Installing the Module 2–9
Connecting Separate Independent Ports
Complete the following steps to connect the cables:
Step
Action
1
Remove any dust caps from the ST-type connectors on the ports
that you are connecting.
2
Align the tab and slot (1) of the transmit cable plug with the
slot and tab (2) of the transmit port connector.
3
Insert the plug, then push the plug sleeve (3) in and turn it to
the right, locking it into place.
4
Connect the receive cable, in the same way, to the receive port
connector.
5
After all cables are installed, go to Chapter 3, Configuring the
Module.
Figure 2-4 Separate Independent Ports
