Description of Menu Options
3–36 Configuring the Module
[6] Downline Upgrade (Cont.)
After the firmware image is loaded into the module's temporary storage
buffer and the new firmware image is validated, the DLU process
overwrites the old firmware image in the module's flash RAM with the
new firmware image.
If your module is installed into a... Then go to...
DEChub One
The section titled DLU Process
Completion
DEChub 900
The following section, DEChub 900
Hub Manager Indications
DEChub 900 Hub Manager Indications
Because the module is nonfunctional during the flash load process,
communications between the module and the Hub Manager cannot take
place. Therefore, the setup screen display shows the following messages:
Module Removed! connection closed!
Press <Return> for Main Menu
This message is normal.
Hub Manager Status Display
The Hub Manager status display shows the following message:
3: PORTswitch 900FP
unknown
This message is normal. The Hub Manager status display continues to
display this message until the DLU process is complete.
