G E K O
EN
13
WARNING
Incorrect assessment of the impact forces can cause serious damage to people, animals or things.
DEA
System re-
minds the installer must verify that the impact forces, measured as indicated by the standard EN 12445, are actually below the limits
set by the standard EN12453.
WARNING
Any external security devices used for compliance with the limits of impact forces must be conform to standard
EN12978.
WARNING
In compliance with EU Directive 2002/96/EC on waste electrical and electronic equipment (WEEE), this electrical
product should not be treated as municipal mixed waste. Please dispose of the product and bring it to the collection for an ap-
propriate local municipal recycling.
3 MODELS AND CONTENTS OF THE PACKAGE
GEKO is an operator for the automation of swing gates and doors with door medium and small size. It is essentially made up of:
- an operator;
- a programmable control panel (adjustable strength, speed, operators stroke, etc..) with built-in 433.92 MHz radio receiver;
Inspect the “Contents of the package” (Pic. 1) comparing it with your product, for useful reference during assembly.
4 OPERATING INSTRUCTIONS
4.1 Technical data
See “TECHNICAL DATA ” table
4.2 Transport
GEKO is always delivered packed in boxes that provide ade-
quate protection to the product, however, pay attention to all in-
formation that may be provided on the same box for storage and
handling.
4.3 Installation and assembly
;
;
;
;
.
.
“TECHNICAL DATA” Table
GEKO
Power supply (V)
230 V ~ ±10% (50/60 Hz)
Motor power supply (V)
24 V
Capacity (W)
80 W
Duty cycle
30%
Max torque (Nm)
180 Nm
Max door lenght (m)
2 m
Max door ground (kg)
240 Kg
Product weight with package (kg)
12 Kg
Operating temperature range (°C)
-20÷60
Opening time 90°(s)
10÷16
Protection degree
IP44
“PRODUCT ACCESSORIES” Table
Article
Codice
Description
GEKO/SF
Lanyard release by
cable for Geko
BAT
Batteries Kit
for 24V
GEKO/BA
Aluminium
articulated Arm
GEKO/BS
Rail sliding arm
“AVAILABLE MODELS” Table
Article
Description
GEKO
-N°1 operator with built in control panel art. NET24
GEKO KIT
-N°1 operator with built in control panel art. NET24
-N°1 operator without control panel
-N°1 pair of external photocells
-N°1 24V flashing light without circuits with aerial
-N°2 two channel rolling code remotes
-N°1 pair of aluminium articulated Arm
GEKO KIT/BUS
-N°1 operator with built in control panel art. NET24/BUS
-N°1 operator without control panel
-N°1 pair of external BUS photocells
-N°1 24V flashing light without circuits with aerial
-N°2 two channel rolling code remotes
-N°1 pair of aluminium articulated Arm
GEKO/2
-N°1 operator with built in control panel art. NET24
-N°1 operator without control panel
Summary of Contents for GEKO
Page 71: ...G E K O 69 ...
Page 75: ......
