270
271
Assembly Guide
270
271
The power supply terminals
have been wired up, and the
power supply has been fixed
inside the housing.
19
Take the connector for one branch of the fan power supply wires, and plug it into the connector for the fan at
the lower back right of the housing. (The connector leading to the fan can be connected to either branch.)
The fan power
connectors
are designed to be
put together so the
ribs on one side of the
smaller connectors fit
into the slots on the
larger connectors.
20
21
Plug the connector for the fan in the printer head into the connector on the other
branch of the power supply wires.
In the photo, you can see
where the various cables you
have connected up in this
stage run from and to. In the
next stage, more cables are
added, and the wiring is tidied
up with cable ties.
Slots
Ribs
Correct
Incorrect
Stage
finished
