272
273
Assembly Guide
272
273
7
8
Untwist the cable from the X-axis limit switch, if necessary, and plug the connector into
the first column of pins on the right. The side of the connector where the metal parts are
visible should be facing to the left.
Untwist the cable from the Y-axis limit switch if necessary, and plug the connector into the third column
of pins from the right. The side of the connector where the metal parts are visible should be facing to
the left.
9
Untwist the cable from the Z-axis limit switch, if necessary, and plug the connector into the sixth column of pins from the right. The side
of the connector where the metal metal parts are visible should be facing to the left.
X-axis
(1st column on
the right)
Metal parts
facing left
Metal parts
face left
Metal parts
face left
Y-axis
(3rd column
from right)
Z-axis
(6th column
from right)
