PSXX Manual Rev: A Software Rev: F
3
Instruction Manual Contents
A. Quick Start
B. User Guidelines
C. How to Determine Power Districts
D. PSXX-1, 2, & 3 Wiring
E. Terminal Wiring Descriptions
F. Terminal Functions
G. PSXX Accessory Addresses
H. Programming CV’s & Values
I. CV Settings
J. Special Programming Instructions
K.
DCC System Sequential Programming Instructions
A. Quick Start
1. All connections involve two wire inputs from the DCC Booster [or Main DCC Power
Bus] into a PSXX and two wire Outputs to the isolated track block
2. All PSXX circuit breakers are ready to operate without programming
3. PSXX are not compatible with Digitrax Analog Address [00] or any method that
adjusts the “0” bit timing to allow operation of an analog engine.
4. Test the PSXX for functionality:
a. Turn on DCC power to the PSXX.
b. Verify D7 LED and D12 LED are ON and D17 & D18 LED are off OFF.
c. Connect a wire from J2.1 to J2.2
d. Verify D12 is ON, D7 is OFF, and D17 is ON.