PSXX Manual Rev: A Software Rev: F
21
For all systems, whenever you enter an address or CV value, you should see D6 flash. This indicates the
PSXX has received the information, stored it, and verified the stored data matches the data you sent.
Lenz Setting PSXX Addresses:
Using the LH100
1. Turn DCC power off.
2. Move PSXX JP1 Jumper to Program Position Pins 1 & 2
3. Turn DCC power on
4. Press “F5" key to select “SW” mode.
5. Enter the switch number to be set using the keypad
6. Press ENTER.
7. Press either the “+” or “ – ” key to set the address. Let LED blink once.
8. Press the “CI” key to enter another address.
9. Repeat steps 5-7 until all addresses are set.
10. Press “ESC” key to return to normal.
11. Turn DCC power off.
12. Move PSXX JP1 Jumper to Run position Pins 2 & 3
13. Turn track power on.
14. Test the switch address setting using “SW” mode and the new switch address[es].
Lenz Programming PSXX CVs:
Using the LH100
1. Turn DCC power off.
2. Move PSXX JP1 Jumper to Program Position Pins 1 & 2
3. Turn DCC power on.
4. Select a locomotive number with the keypad that is unused on your layout.
5. Press the “F” keys and the “+” or “– ” key to select “POM” mode then hit “Enter”.
6. Press “+” or “–” until “CV” is displayed then press “Enter”.
7. Press the desired CV number
8. Press “Enter”
9. Enter the CV value to change
10. Press “Enter”.
11. The display will show the CV number and value to be programmed.
12. Press "Enter" to program the CV, note the LED on the PSXX flashes when the key is released
13. Press "Esc" key to return to Step 7] or press "Esc" three times to exit CV programming
14. Turn power off
15. Move PSXX JP1 Jumper to Run position Pins 2 & 3
Audible Short Indication
The two holes inside the circle [U8] on the top of the board are for use
with an audible short indicating device. It is designed for use with part no. compsonalert. The device
is installed with the [+] terminal in the square hole.
You can obtain these components for all PSXX devices from
Tony’s Train Exchange: 800.978.3472 [email protected]
Part no. compsonalert Part no. screwtermkitpsxx1 Part no. dsppsxx.pb
Audio Alert Screw Terminal Kit for PSXX Reset Push Button Switch
