PSXX Manual Rev: A Software Rev: F
10
PSXX LED Outputs do not require resistors
J7 Auto/Manual Reset & Powering LEDs
●
J7-1 +5V Output for powering external LEDs, etc. in conjunction with Block Occupied
or Block Shorted outputs. Maximum load should be less than 25mA.
●
J7-2 GND Return connection for J7-1 5V output
●
J7-3 to J7-4 with Jumper: Manual Reset [open to reset]
The user can install a
normally closed switch in series with the jumper. Open the switch to reset the PSXX or
send an accessory ON command to the PSXX on-off command address [see Section B
item 11]
●
J7-5 TBD
●
J7-6 GND
J10 DCC Power In Remote LED Indicator Output
●
J10-1 +Remote D12 (Green) Anode
●
J10-1 - Remote D12 (RED) Cathode
J11 Track Power On Remote LED Indicator Output
●
J11-1 +Remote D7 (Green) Anode
●
J11-2 - Remote D7 (RED) Cathode
F. Terminal Functions
J1
– DCC power input connections from the DCC booster. The J1 can be branched out
to allow multiple connections to other PSXX breakers and PSX-AR reversers. The
Power Link [J1-1 & J1-2] makes it easier to connect to another PSXX circuit breaker or
PSX-AR auto reverser.
