PSXX Manual Rev: A Software Rev: F
19
2. Release the control key Once you see the PSXX’s D10 LED flash indicating an
address has been stored.
3. If you see multiple flashes, you have stored the same address more than once.
4. Since the PSXX will flash D10 each time you send it an accessory address, you
can easily get a feel for the timing involved.
5. In normal operating mode [not programming mode], select an accessory address
that has not been programmed into the PSXX.
6. Send an accessory command to this address and hold down the 1 or 4 control
key.
7. D10 will flash each time the command station repeats the accessory address.
This will give you a feel of how long to hold the control key while you are
programming to avoid storing multiple addresses.
