dbx DriveRack 260 User Manual Download

Page: 44 / 70

DriveRack

DriveRack® 260 User Manual

Utilities/Meters

Section 5

Utility

LCD Contrast

Auto EQ Plot

RTA

Power Up Modes

PUP Program Stored

PUP Mute

Current

ZC Setup

Panel 1 None

(STORE) - EDIT PANEL

Panel 1

ZC-2

Boost 0dB Cut 0dB

Output

1 3 5
2 4 6

Set Security Level

Pre EQ

Low

Set 260 Device Level

High

Password

Enter Password

Password

Edit High Password

Edit Med Password

Press Store to Change

Press Store

Program List

List Size 10

List Index 1

Program 1

Prog Change Mode

Program List

Prog Lock 24

Output Jumpers

Output 1

Setting 30

Panel 1

ZC-3

Select A

No Change

Panel 1

ZC-4

Switch

No Change

1 2 3 4

<DATA> - SELECT CHARACTER
<PREV/NEXTPG> - LEFT/RIGHT:
<STORE>-SAVE/<UTIL>-EXIT

NAME:

OCK VENUE

<DATA> - SELECT CHARACTER
<PREV/NEXTPG> - LEFT/RIGHT:
<STORE>-SAVE/<UTIL>-EXIT

NAME:

• Press the

DATA

wheel to select the password to edit. When the password level has been selected, press the

STORE

button to set the password. Please note that the default passwords, from the factory, are SRV (High

password) and Hendrix (Medium password). The display will now appear similar to this:

Utility

LCD Contrast

Auto EQ Plot

RTA

Power Up Modes

PUP Program Stored

PUP Mute

Current

ZC Setup

Panel 1 None

(STORE) - EDIT PANEL

Panel 1

ZC-2

Boost 0dB Cut 0dB

Output

1 3 5
2 4 6

Set Security Level

Pre EQ

Low

Set 260 Device Level

High

Password

Enter Password

Password

Edit High Password

Edit Med Password

Press Store to Change

Press Store

Program List

List Size 10

List Index 1

Program 1

Prog Change Mode

Program List

Prog Lock 24

Output Jumpers

Output 1

Setting 30

Panel 1

ZC-3

Select A

No Change

Panel 1

ZC-4

Switch

No Change

1 2 3 4

<DATA> - SELECT CHARACTER
<PREV/NEXTPG> - LEFT/RIGHT:
<STORE>-SAVE/<UTIL>-EXIT

NAME:

OCK VENUE

<DATA> - SELECT CHARACTER
<PREV/NEXTPG> - LEFT/RIGHT:
<STORE>-SAVE/<UTIL>-EXIT

NAME:

• Enter the characters which you would like to use as your password. Turn the

DATA

wheel to change the

selected character. Pressing the

DATA

wheel in successively allows you to toggle between uppercase letters,

lowercase letters, numbers, and symbols/blank space. The

PREV PG

and

NEXT PG

buttons allow you to move

to the next or previous character (left and right).

• Once the password has been entered, press the

STORE

button to save it. You can now repeat the previous steps

for the other password level if required. Since the security system has three levels (high, med and low), there can
be three different levels of user access. High level users always have full access to the box. Typically, the device
would be programmed to allow the medium level users minimal access, and the low level users very limited or
no access. However, if you simply require full access and no access, you do not need to set the medium level
password. Just make sure to set all of your Security Level functions to high, meaning one must be logged in as a
high level user to have any access to the processor’s parameters.

To now lock out the box you must log in as a low level access user (or essentially log out as a high level access
user). Follow this procedure to lock out the device:

• Use the

PREV PG

NEXT PG

buttons to move to the security page that appears as follows:

Utility

LCD Contrast

Auto EQ Plot

RTA

Power Up Modes

PUP Program Stored

PUP Mute

Current