dbx DriveRack 260, User Manual

Page: 28 / 70

26
DriveRack
®
DriveRack® 260 User Manual
Configuration Functions
Section 3
• You are now in the Output (Post-Crossover) Delay module. The upper left-hand corner of the display indicates
how much delay time is currently allocated to this module. The 1-6 Output indicators indicate which Output
Delay module you have selected. Rotate the
DATA
wheel to set how much delay time will be available to the
selected Output Delay module. Note that the actual delay time is not set at this point; the delay time can be set
once you have exited Configuration mode. Pressing and then rotating the
DATA
wheel lets you link or unlink
the Output Delay modules as desired. Use the
PREV PG
and
NEXT PG
buttons to move through outputs 1-6,
allocating delay and linking/unlinking modules as necessary, then to the next module screen which will appear
something like this:
GEQ
Select
Link/Unlink
<DATA> - SELECT CHARACTER
<PREV/NEXTPG> - LEFT/RIGHT
<STORE>-EDIT/<UTIL>-EXIT
NAME: O utput Ch2
CONFIGURATION ERROR!
One or more outputs
have duplicated
channels.
M
6
4
2
5
3
1
M
A
B
Program 1
8
FACT
GEQ
GEQ
G
G
A
B
COMP
Select
Link/Unlink
A
B
2
N
C
F N
S D
D
P 2X6 P P
C
C
F
1
MONO DLY 1.3
10 ms Unused
Select
Link/Unlink
A
B
D
D
1X1 FILTER
Select
Route
2
A
A
3
4
A
B
5
6
A
A
2 POST EQ
Link/Unlink
2
3
4
5
6
2 P
P
P
P
P
P
LIMITER
Select
Link/Unlink
2
3
4
5
6
2 L
L
L
L
L
L
MONO DLY 20 MS
810 ms Unused
Select
Link/Unlink
2
3
4
5
6
2 D
D
D
D
D
D
OUTPUT CH2
Route
NAME Output Ch2
2
3
4
5
6
2
<STORE>-EDIT NAME
• You are now in the Output Route and Naming module. The arrow indicates whether you can change the Routing
or change the Name of the output. The output 1-6 indicators indicate which Output module block is currently
selected. Rotate the
DATA
wheel to change the Output Route. Pressing the
DATA
wheel in, then allows you
to rename the output. Turning the
DATA
wheel will allow you to select a predetermined name. Pressing the
STORE
button will move you to the Naming Page which appears something like the following display:
GEQ
Select
Link/Unlink
<DATA> - SELECT CHARACTER
<PREV/NEXTPG> - LEFT/RIGHT
<STORE>-EDIT/<UTIL>-EXIT
NAME: O utput Ch2
CONFIGURATION ERROR!
One or more outputs
have duplicated
channels.
M
6
4
2
5
3
1
M
A
B
Program 1
8
FACT
GEQ
GEQ
G
G
A
B
COMP
Select
Link/Unlink
A
B
2
N
C
F N
S D
D
P 2X6 P P
C
C
F
1
MONO DLY 1.3
10 ms Unused
Select
Link/Unlink
A
B
D
D
1X1 FILTER
Select
Route
2
A
A
3
4
A
B
5
6
A
A
2 POST EQ
Link/Unlink
2
3
4
5
6
2 P
P
P
P
P
P
LIMITER
Select
Link/Unlink
2
3
4
5
6
2 L
L
L
L
L
L
MONO DLY 20 MS
810 ms Unused
Select
Link/Unlink
2
3
4
5
6
2 D
D
D
D
D
D
OUTPUT CH2
Route
NAME Output Ch2
2
3
4
5
6
2
<STORE>-EDIT NAME
• Turn the
DATA
wheel to change the selected character. Pressing the
DATA
wheel in successively allows you
to toggle between uppercase letters, lowercase letters, numbers, and symbols/blank space. The
PREV PG
and
NEXT PG
buttons allow you to move to the next or previous character (left and right). Once all of the naming
assignments have been made, press the
UTILITY
button to return to Configuration mode. Use the
PREV PG
and
NEXT PG
buttons to move through outputs 1-6, re-routing and renaming outputs as necessary, until you reach
the next page. The display will now read ‘CONFIGURATION DONE’. If you have made all necessary changes,
press the
DATA
wheel to load these changes into your program. If you decide that you do not want to load
these changes, you can press and hold the
CONFIG
button until the display reads ‘Abort Config’. Either way you
will now be back in Program Edit mode.
Important Note!
You must navigate to the last page within Configuration mode and load the new configuration (by
pressing the
DATA
wheel) for any changes in Configuration mode to take effect.
3.6 Saving Configuration Changes
Once your Configuration edits have been loaded, these new changes can be saved. Please see section 3.4 ‘Saving Factory
Program Changes’ for information on how to store and rename the program. You can then make necessary processing
parameter changes (i.e. crossover, EQ, Delay adjustments, etc.).